JHS-YBA-12-75
Part # VA014357
The JHS-YBA-12-75 is a hydraulically active yaw brake caliper for applications in modern wind turbines.
Contact Force: 141 kN
- Hydraulically applied
- Air gap between brake pad and disc up to 2mm per side
- Special epoxy resin pad with GFK carrier plate
- Tight fitting between brake pad and caliper
- Drain ports for oil leakage, preventing oil from contaminating brake disc
- Min / Max working temperature -40°C / + 60°C
Interchangeability: BSAB 75
Additional PRODUCTS
For many years a seawaterproof version of the SFB series has been used successfully on winch motors in ship building and as a safety, service or holding brake in wharf crane installations.
A hydraulic active rotor brake with a braking force of 44 kN that’s been specially developed for use in damp, dusty and corrosive working environments
Due to its high capacity, our SFRA brake is mainly used as a rotor brake in wind turbines. It is particularly suitable for applications with a high duty cycle.
Due to its high capacity, our SFRA brake is mainly used as a rotor brake in wind turbines. It is particularly suitable for applications with a high duty cycle.
A hydraulic active yaw brake with GL Type Certification and braking force of 620 kN.
A passive yaw sliding bearing with a robust yet simple design that guarantees optimum performance throughout the life of the turbine.
A passive yaw sliding bearing with a robust yet simple design that guarantees optimum performance throughout the life of the turbine.
Half Wave & Full Wave rectifiers for Din rail or panel mounted rectification.
